• E27 Lampholder gauges | "GO" Gauge For Lampholder E27 | 7006-25A-2
قیمت مناسب E27 Lampholder gauges | "GO" Gauge For Lampholder E27 | 7006-25A-2 آنلاین

E27 Lampholder gauges | "GO" Gauge For Lampholder E27 | 7006-25A-2

جزئیات محصول:

محل منبع: چین dongguan
نام تجاری: kingpo
گواهی: iso9001
Model Number: 7006-25A-2

پرداخت:

Minimum Order Quantity: 1
قیمت: To be quoted
جزئیات بسته بندی: جعبه ایمنی کارتن یا جعبه تخته سه لا
زمان تحویل: 7 روز
Payment Terms: T/T
قابلیت ارائه: 1000 عدد در ماه
اکنون تماس بگیرید

اطلاعات تکمیلی

نام تجاری: Kingpo Standard: IEC60061-3
HRC: C58 To C60 Material: Hardness Steel
برجسته:

Go No Go Gauge,Go And Not Go Gauge

,

Go And Not Go Gauge

توضیحات محصول

E27 Lampholder gauges | "GO" Gauge For Lampholder E27 | 7006-25A-2

 

 

Purpose: to check

a) the minimum dimensions of the lampholder screw thread according to sheets 7004-21 and 7004-27

b) dimension X according to sheet 7005-20

c) the machnical compatibility of the lamp holder with respect to lamps have adverse dimensions

 

Testing: It shall be possible to screw the threaded part of the gauge into the lampholder without using undue force.

when the gauge has be screwed in as far as it will go, mark Y on the plunger shall be co-planar with mark A on the shaft.

the sleeve is then placeed over the shaft of the gauge with its open end resting on the top edge of the screw shell of the holder. with the sleeve in this position, the plunger is pushed down as far as it will go.

surface B of the gauge shall then lie between the marks X1 and X2 on the plunger or be co-planar with either of them; it shall not lie beyond them.

 

Related gauges for E27 lamp holder:

E27 lamp holder gauge "GO" GAUGE FOR LAMPHOLDERS E27 7006-25A-2
NOT GO”GAUGE FOR SCREW THREADS OF LAMPHOLDERS E27 7006-26-4
GAUGE FOR TESTING PROTECTION AGAINST BULB-NECK DAMAGE AND FOR TESTING CONTACT-MAKING IN LAMPHOLDERS E27 7006-21-5
GAUGE FOR TESTING CONTACT-MAKING AND PROTECTION AGAINST ACCIDENTAL CONTACT DURING INSERTION OF LAMPS IN LAMPHOLDERS E27 7006-22A-5
GAUGE FOR DETECTING SIDE-CONTACTS WITH CUTTING-EDGES IN LAMPHOLDERS E27 7006-22B-1
GAUGE I FOR CHECKING SIDE-CONTACT RESILIENCY IN LAMPHOLDERS E27 7006-22C-1
GAUGE II FOR CHECKING SIDE-CONTACT RESILIENCY IN LAMPHOLDERS E27 7006-22D-1

 

E27 Lampholder gauges | "GO" Gauge For Lampholder E27 | 7006-25A-2 0

می خواهید اطلاعات بیشتری در مورد این محصول بدانید
E27 Lampholder gauges | "GO" Gauge For Lampholder E27 | 7006-25A-2 آیا می توانید جزئیات بیشتری مانند نوع ، اندازه ، مقدار ، مواد و غیره برای من ارسال کنید
با تشکر!