 |
Iec 60061 3 Standard Go And Not Go Gauge For Unmounted Bi-Pin Cap G5-7006-46-3
جزئیات محصول:
| محل منبع: | چین dongguan |
| نام تجاری: | kingpo |
| گواهی: | iso9001 |
| Model Number: | 7006-46-3 |
پرداخت:
| Minimum Order Quantity: | 1 |
|---|---|
| قیمت: | To be quoted |
| جزئیات بسته بندی: | جعبه ایمنی کارتن یا جعبه تخته سه لا |
| زمان تحویل: | 7 روز |
| Payment Terms: | T/T |
| قابلیت ارائه: | 1000 عدد در ماه |
|
اطلاعات تکمیلی |
|||
| نام تجاری: | Kingpo | Material: | Hardness Steel |
|---|---|---|---|
| Standard: | IEC60061-3 | HRC: | C58 to C60 |
| برجسته کردن: | Go No Go Gauge,Iec 60061 3,Iec 60061 3 |
||
توضیحات محصول
G5 lamp cap gauge | "Go" and "Not Go" gauge for unmounted bi-pin cap(not for use on finished lamps) G5-7006-46-3
Purpose: to check dimensions E min., E max., F min., G max. and the combined pin diameter and displacement of pins(including bosses) of unmounted bi-pin caps G5.
Testing: the pins of the cap shall enter the gauge at surface O and, when fully inserted, the surfaces of cap and gauge shall contact. In this position the ends of the pins shall be co-planar with or project beyond surface X. Each individual pin shall enter the hole e2 until the boss of the pin and the surface of the gauge contact, but they shall not enter hole e1. The boss of the individual pin shall enter hole b at surface O until the surface of the cap and the gauge contact.
Related gauge:
| "GO" GAUGE FOR BI-PIN CAP ON FINISHED LAMPS G13, 7006-46A-3 |